Filter
Top Products
Repair Information 4-29
4085-001
Cam Engine Motor with Gear Removal
1. Remove the rear cover. Refer to “Rear Cover Removal” on
page 4-3.
2. Remove the exit tray cover. Refer to “Exit Tray Removal” on
page 4-5.
3. Remove the left cover. Refer to “Left Cover Removal” on
page 4-7.
4. Disconnect the cam engine motor connector (J8) from the
engine board.
5. Remove the two screws {A} from the motor.
6. Remove the motor through the front of the printer. Note the
routing of the wires.