Filter
Top Products
Diagnostic Aids 3-33
4085-001
Index System Test
This test determines if the index system sensor is working correctly.
To run the test, select Index System Test from the SUBSYSTEM
TESTS menu. The following screen is displayed:
The index system is run open loop and the real time position count is
displayed on the panel.
To exit the test, select Return or Stop.
Maintenance Sled Test
This test determines if the maintenance sled sensor system is
properly functioning. To run the test, select Maint Sled Test from the
SUBSYSTEMS TESTS menu. The printheads are uncapped. This
utilizes the maintenance sled motor. The printheads move to the
middle of the frame to give the servicer access to the maintenance
homing sensor. The status of the homing sensor now begins
updating real time on the panel. The servicer can toggle this status
by blocking or unblocking the optical sensor. The following screen is
displayed:
The state of the maintenance sled sensor is indicated by “O” for
open or “C” for closed.
To exit the test, select Return or Stop. When the test is ended, the
carrier is homed and the printheads are capped.
Index System Test
Position = 823
Maint Sled Test
State = O