Filter
Top Products
3-2 Service Manual
4085-001
Disable/Enable Operator Panel Menus
To prevent users from accessing the Ready Menu group and
modifying default printer settings, follow these steps:
Note: These steps do not prevent access to the Busy Menu group
and the Diagnostics Menu group.
1. Turn off the printer.
2. Press and hold the buttons identified in the “Power-On Reset
Button Functions” on page 3-1 to gain access to the
Configuration Menu Group.
3. Turn on the printer. Release the buttons once the Performing
Self Test message is displayed. The printer performs its normal
POR cycle and shows the first entry in the Configuration Menu.
4. Select the Panel Menu setting and modify the value to Disable.
The Disabling Menus message is temporarily shown.
Note: These steps do not prevent access to other menu groups.
To unlock, that is, enable the menus, repeat the above steps except
modify the Panel Menus value to Enable. To indicate the menus are
being unlocked, the Enabling Menus message is shown.
Note: This method of locking/unlocking the Operator Panel Menus
may ONLY be used when the PJL PASSWORD Environment
Variable is set to zero. If PASSWORD is set to any non-zero value,
the Panel Menus selection is NOT available in the Configuration
Menu Group.
If a user attempts to access the Ready Menu Group while the menus
are locked, the printer instead automatically provides access to the
Busy/Waiting Menu group. Access to the Busy/Waiting Menu group
permits the user to execute operations available in this menu when
the printer is not busy.
Entering CE Diagnostics Mode
Caution: The Customer Support Center should never instruct users
how to access Diagnostics Mode.