Filter
Top Products
Diagnostic Aids 3-35
4085-001
K&C TSR Test
This test determines the status of the printhead TSR (thermal sense
resistor). The resistance is displayed real time. The following screen
is displayed:
To exit the test, select Return or Stop.
Note: If zero is displayed on “K”= or “C”=, replace the printhead.
M&Y TSR Test
This to determines the status of the printhead TSR (thermal sense
resistor). The resistance is displayed real time. The following screen
is displayed:
To exit the test, select Return or Stop.
Note: If zero is displayed on “K”= or “C”=, replace the printhead.
Diagnostics (Mode 2) - Printer Setup
Setting the Page Count
The printer’s page count can be changed using the Diagnostics
menus. This menu is used by the CE to reset the Page Count setting
whenever the engine card is replaced. The engine card contains the
printer’s NVRAM memory. When Page Count is selected from the
PRINTER SETUP menu, the current page count is displayed as
follows:
K & C TSR Test
K=104B3 C=104A1
M & Y TSR Test
K=104B3 C=104A1
Page Count
=1234567*