Filter
Top Products
Diagnostic Information 2-45
4085-001
Error Recovery from Attendance Conditions
The following table indicates how the printer acts when each of the
attendance/error conditions occurs. Attendance conditions can be
categorized into these distinct groups:
• Type 1 - When a Type 1 condition occurs during a job, the
printer finishes printing all pages in the paper path.
Furthermore, it may pick a few additional pages if they had
already been committed to be printed. Depending on the
specific condition, some data loss may occur on the pages. See
“Error Recovery from Attendance Conditions” on page 2-45 .
Once the pages are printed, the printer displays the attendance
message. After the condition is cleared, the printer resumes
printing the next page in sequence. In other words, none of the
pages printed before the attendance message will be reprinted.
• Type 2 - When a Type 2 condition occurs during a job, the
printer finishes printing all pages in the paper path before
displaying the attendance message. After the condition is
cleared, the printer resumes printing the next page in sequence.
In other words, none of the pages printed before the attendance
message will be reprinted.
• Type 3 - When a Type 3 condition occurs, the printer
immediately stops and an attendance message is displayed. All
pages in the paper path must be manually cleared by the user.
After the condition is cleared, the printer resumes printing the
pages that were left in the paper path.