Filter
Top Products
4-36 Service Manual
4085-001
Star Wheel Shaft Assembly Removal
1. Remove all covers.
2. Remove the carrier and belt. Refer to “Engine Board /Cover
Removal” on page 4-14.
3. Remove pump housing maintenance station, tank, and
transport carrier motor. Refer to “Pump Housing/Maintenance
Station/Ink Waste Tank/Transport Carrier Motor Removal” on
page 4-20.
4. Disconnect the spring {A} connecting the base assembly to the
star wheel cam follow assembly.
5. Remove the E-clip {B} from the right end of the star wheel shaft.
6. Slide the shaft to the left and lift out. Disconnect the star wheel
cam follow from the cam shaft assembly.
7. Remove the star wheel assembly.