Filter
Top Products
Diagnostic Information 2-3
4085-001
Error Indicator Table
Error Symptom Action
900 RIP Software Perform the “RIP Card
Service Check” on
page 2-64 .
902 Engine Software Replace the engine board.
See the “Engine Board /
Cover Removal” on
page 4-14 .
903 RIP Software Check RIP/Engine cable.
Replace the RIP card. See
the “RIP-EMC Shield
Assembly/RIP Card
Removal” on page 4-24 .
904 Service Options Interface Check cables. Replace the
board in the optional tray.
905 Engine Flash XX
80 Flash Erase failure
81 Flash Programming failure
82 Flash - Invalid checksum on
input data.
83 Flash - A failure occurred
when programming this block.
Replace the engine board.
See the “Engine Board /
Cover Removal” on
page 4-14 .
906 Engine Board XX
10 ASIC RAM failure
20 Engine Processor failure
21 Boot Code Checksum failure
22 Engine ASIC failure
23 Boot / Engine Card
incompatibility
Replace the engine board.
See the “Engine Board /
Cover Removal” on
page 4-14 .