Filter
Top Products
3-20 Service Manual
4085-001
The Registration menu is formatted so that all menu items fit on a
single screen as shown. This allows manufacturing to quickly set
and verify the registration setting.
Terminology:
• T represents Top Margin and L represents Left Margin.
• s represents the sign for negative values. This space is blank for
positive values.
• xx represents the margin value.
• An asterisk (*) is displayed next to the default value.
Upon first entering the Registration menu, the Left margin sign/value
pair flashes. This indicates it is the margin value being changed. To
change the value, press either Menu> or Menu<. Once the value
you want is displayed, press Select to save the value and move to
the next margin value. The margin values are traversed in this order:
Top, then Left. If you need to skip a margin value (that is its value is
OK), press Select. The default value remains the same.
If Return is pressed to exit the Registration menu after a margin
value has been incremented or decremented (but not saved via
Select), then the default value is not changed.
To exit the Registration menu, press Return.
Input Source Print Tests
The Diagnostic Input Source PRINT TESTS verifies that the printer
can print on media from each of the installed input sources. Each of
the installed sources is available as a selectable option within the
PRINT TESTS menu. For each source, there are two choices:
• Single (print the Print Test page once).
• Continuous (continue printing the Print Test page until Return
or Stop is pressed).
Tray 1
T= sxx* L= sxx*