Filter
Top Products
Diagnostic Information 2-13
4085-001
Warning Messages
As shown in each of the Status Screens, only one warning message
can be displayed at any one time. Once the current warning
condition is cleared, the printer automatically shows the next highest
priority warning message. If an event occurs which causes a higher
priority warning, the higher priority warning message replaces the
lower priority warning message.
Panel
Message
Description
Available on Status
Screen
Supplies One or more of the printer supply items
has either reached its life warning or is
exhausted and/or one of the paper
sources is low, empty, or missing.
• Ready
• Hex Trace Ready
• Power Saver
• Busy
• Resolution Reduced
• Waiting
Parallel
USB<x>
The host interface from which the
printer is currently drawing and
processing data.
Those messages which are not
designated by a <x> imply the active
host interface is a standard interface.
Those messages designated by <x>
indicate the active interface is
connected to the printer by PCI
connector x.
Those messages designated by
<x><y> indicate the active interface is
connected to the printer by a channel y
on PCI connector x, or if x=0 on the
standard network interface.
The copying message is shown when
the printer is drawing and processing
data originating from an OptraImage™
scanner connected to the printer by a
network adapter.
Note: There is no Copying host
interface. The associated network
interface which exists between the
printer and network adapter is used for
data transmission.
• Ready
• Hex Trace Ready
• Power Saver
• Busy
• Resolution Reduced
• Waiting