Repair Information 4-45
4085-001
Right Index Frame Pivot Assembly Removal
1. Remove all covers.
2. Remove the carrier and belt. Refer to “Engine Board /Cover
Removal” on page 4-14.
3. Remove the pump housing, maintenance station, tank and the
transport carrier motor. Refer to “Pump Housing/Maintenance
Station/Ink Waste Tank/Transport Carrier Motor Removal” on
page 4-20.
4. Remove the star wheel shaft. Refer to “Star Wheel Shaft
Assembly Removal” on page 4-36.
5. Remove the paper feed platen. Refer to “Paper Feed Platen
Assembly Removal” on page 4-38.
6. Remove encoder disk feed roller assembly. Refer to “Encoder
Disk Feed Roller Assembly Removal” on page 4-34.
7. Remove the two index frame springs {A}.
8. Remove three screws and washers {B} from the right index
frame pivot assembly.
9. Remove the right index frame pivot assembly.