4-22 Service Manual
4085-001
Index Card Assembly Removal
1. Remove the rear cover. Refer to “Rear Cover Removal” on
page 4-3.
2. Remove the exit tray cover. Refer to “Exit Tray Removal” on
page 4-5.
3. Remove the left cover. Refer to “Left Cover Removal” on
page 4-7.
4. Unplug the index board connector.
5. Remove the three screws {A} from the index board.
6. Remove the index card.
Note: The index card and the encoder disk feed roller must be
replaced as a matching set. See “Encoder Disk Feed Roller
Assembly Removal” on page 4-34.