Filter
Top Products
2-70 Service Manual
4085-001
38 Memory Full Press Go to clear the message and continue
processing the job. Some data will be lost. You
must allow additional memory to complete your
print job by:
• Deleting fonts, macros, and other data in
RAM.
• Simplifying your print job.
• Installing additional memory.
Press Menu> or Menu< to access the reset
function in the Busy/Waiting Menu group.
Menu Lockout does not prevent access to the
Busy/Waiting Menu group. The menu buttons
are not active when Reset Control is Off.
51 Defective Flash Press Go to clear the message and continue
processing the job. All downloaded fonts and
macros not written to flash will be deleted.
Press Menu> or Menu< to access the reset
function in the Busy/Waiting Menu group.
Menu Lockout does not prevent access to the
Busy/Waiting Menu group. The menu buttons
are not active when Reset Control is Off.
53 Unformatted Flash Press Go to clear the message. The flash is
marked as bad and normal operation
continues. Flash operations will not be allowed
until the flash is formatted.
Message Explanation