Filter
Top Products
3-42 Service Manual
4085-001
Example of Modifying a Printer Setting Using the
Operator Panel
Use the following to modify any printer setting or initiate any
operation in the Busy/Waiting Menu Group, Ready Menu Group, or
Diagnostic Menu Group. The only variation is the action required to
access the Diagnostics Menu Group (see “Entering CE Diagnostics
Mode” on page 3-2 for details).
To change the PCL Orientation setting in the Ready Menu Group:
1. Press Menu> when the Ready message is displayed to access
the Ready Menu Group. The printer is offline and the first menu
(SUPPLIES MENU) is displayed on the second line.
2. Press Menu> or Menu< repeatedly until the menu you want to
access is displayed on the second line. Press Select to display
the first setting or menu contained in that menu.
COLOR MENU is displayed on line 1, and the first entry in the menu
is the Font Source printer setting and it is displayed on line 2.
3. Press Menu> or Menu< repeatedly until the printer setting that
you want to change is displayed on the second line. Press
Select to display the default value for that printer setting. (If the
printer setting you want to modify is in another menu, then press
Menu> or Menu< repeatedly until the menu which contains the
printer setting you want to change is displayed on the second
line, and press Select to enter the menu.
Note: The Print Quality printer setting is displayed on line 1, and the
default value (Normal) is displayed on line 2. An asterisk is always
displayed next to the default or currently selected value. An equal
SUPPLIES MENU
COLOR MENU
Print Quality