Repair Information 4-39
4085-001
Exit Shaft with Gear Removal
1. Remove all covers.
2. Remove carrier and belt. Refer to “Engine Board /Cover
Removal” on page 4-14.
3. Remove pump housing, maintenance station, tank, and
transport carrier motor. Refer to “Pump Housing/Maintenance
Station/Ink Waste Tank/Transport Carrier Motor Removal” on
page 4-20.
4. Remove star wheel shaft. Refer to “Star Wheel Shaft Assembly
Removal” on page 4-36.
5. Remove paper feed platen. Refer to “Paper Feed Platen
Assembly Removal” on page 4-38.
6. Remove the E-clip from the right end of the exit shaft.
7. Move exit shaft to the left, lift and pull to the right to remove the
exit shaft gear {A}. Note the orientation of the gear before
removal.
8. Remove the exit shaft.