Filter
Top Products
2-54 Service Manual
4085-001
Wet Wipe The maintenance station applies a cleaning solvent to the
edge of the printhead that will be wiped across the entire
bottom surface of the printhead. This will occur several time
during the life of the printhead to facilitate the removal of ink
debris. This solvent also serves to lubricate the wipers to
reduce wear and prevent ink from drying on the wiper edge,
which can reduce wiper efficiency.
Maintenance
Sump
Capacity
The maintenance station will collect the waste ink in a
container (bottle) with sufficient volume for the 100,000 page
life of the printer. The container will provide spill protection for
a 15-degree tilt at maximum waste volume.
Function Description