Filter
Top Products
Diagnostic Information 2-43
4085-001
PerfectFinish Empty
The above is a representation of the operator panel when
PerfectFinish empty occurs. This message indicates that the supply
item must be replaced.
The following actions can be taken while this message is displayed:
• Press Go to clear the message and override the message. For
the rest of the current job, the printer prints without
PerfectFinish. The message appears again at the beginning of
every subsequent job until the empty condition is cleared.
• Replace the PerfectFinish supply item. Press Go to clear the
message and override the message.
Short Paper
The above is a representation of the operator panel when the paper
length is too short to print the data as formatted.
This error can only occur when the printer does not know the actual
paper size that is loaded in a tray. If the tray has auto-size
capabilities, then the paper stop could be in the wrong position. If the
tray is not capable of auto-size sensing, then the operator may have
entered the wrong size in the paper size menu.
The following actions can be taken while this message is displayed:
• Press Go to clear the error and continue printing pages.
• Press Menu> or Menu< to access the Busy/Waiting Menu
group. The following functions may be available using the Busy/
Waiting Menu
– Cancel Job
87 PerfectFinish
Empty
34 Short Paper