Filter
Top Products
Line 6 GearBox 3.7 – Using Your Line 6 Hardware
2•18
USB 2.0 - This is where you connect the supplied USB cable to POD X3, with the other end going
to your computer’s USB 2.0 port. Of course, your POD is capable of processing your Tones all by itself,
but you’ll need to connect the USB cable to your computer to use it with GearBox, and to use POD X3
as your sound card device. Note that you should always connect to a separate USB controller channel
from other USB audio or MIDI interfaces to provide POD X3 with the full USB bandwidth. It is also
recommended to connect directly into a USB port on your computer and not into a USB hub.
*Note - be sure to always power off or mute your speakers or monitoring setup before connecting/
disconnecting the USB cable and powering on/off POD X3, as well as before booting up or shutting down
your computer if POD X3 is already connected. The best practice is to always power on your speakers last,
and power them off first when connected to other audio gear to avoid a “pop”.
S/PDIF Digital Output - To send output from POD X3 to another device digitally, connect from this
S/PDIF Dig Out to the S/PDIF in on your other device. Connecting digitally is the best choice for
routing to external digital recording devices, such as a DAT recorder. The S/PDIF output sends out
the Tone(s) according to your device settings - these options are found on the POD X3 device itself
by pressing the “Outputs” button (these digital I/O options are not accessible in GearBox). The digital
signal is always sent at 24-bit resolution. For more information on using these digital connections,
please see your POD X3 Pilot’s Handbook, or check out the GearBox Recording Setup Guide available for
download on the GearBox - User Manuals page of the Line 6 web site.
*Note that when using POD X3 with GearBox, the GuitarPort Online playback audio is never routed to
this S/PDIF output. This is necessary to comply with artist copyright requirements that Line 6 follows for
the GuitarPort Online Tracks and artist content.