Line 6 3.7 Computer Hardware User Manual


 
Line 6 GearBox 3.7 – Driver Panel & Recording
3•13
Mac
®
- Line 6 Audio-MIDI Devices Dialog
You can launch the Line 6 Audio-MIDI Devices dialog from within the Mac
®
System Preferences,
or from the GearBox Preferences > Hardware tab. On Mac
®
systems, all Line 6 hardware utilizes the
Mac
®
OS X
®
Core Audio driver format, which means that some of your Line 6 device settings will be
in the OS X Audio-MIDI Setup dialog. You can get to this dialog from within the Line 6 Audio-MIDI
Devices dialog (or, from the Finder by going to Applications > Utilities > Audio-MIDI Setup).
Line 6 Audio-MIDI Settings - Driver Tab
TonePort & GuitarPort devices – The following example shows TonePort UX2 as the selected device,
with the GearBox software running. If you have the TonePort UX8, you’ll have even more options,
so be sure to also read up on the UX8 specific sections...
POD X3 & PODxt devices - You’ll see some differences with a POD device selected – as noted in the
following descriptions…
5
6
1 2 3 4
1 – Line 6 Device selector: Allows selection of any supported Line 6 USB audio device that is
connected. Note that if you have more than one supported device connected, each will be selectable
in this list, regardless if it is in use by the GearBox application or not. If your device is not connected
and powered on, it will not appear in this list.
2 – Selected Device Icon: An icon for the selected Line 6 Device appears here.
3 – Driver version: Displays the current device’s installed driver version number.