Line 6 GearBox 3.7 – Driver Panel & Recording
3•6
TonePort GX, DI, GuitarPort and PODxt devices are always “fixed” to only route their “instrument”
1 /4 input signal into GearBox. When a GuitarPort or PODxt is the selected device, this Input
Source Select list offers only “Instrument” as the source.
PODxt & POD X3 devices do not offer an Input Source menu in this dialog.
TonePort UX8 has a larger set of options - see the next section for its Inputs & Recording tab.
Device Sends Info box: One line for each GearBox Record Send appears here along with a general
description for signal each Send is carrying. Refer to your specific Line 6 device type in the following
descriptions.
Note that multiple Sends for your Line 6 device are only available when using the ASIO driver in
your recording software. If your recording software is configured to access the device via its WDM or
DirectSound driver, then only one Send will be available in the recording software (Send 1-2).
TonePort & GuitarPort devices (except UX8) show the following Sends:
TonePort devices show two stereo Sends (Record 1-2 and Record 3-4)
Single Tone Source (Mono/Stereo): When the GearBox application is not running, Record 1-2 •
and 3-4 both carry the unprocessed signal. When running GearBox, Record 1-2 will carry the
fully GearBox-processed signal. For Record 3-4, you can choose between a signal with no post-