Filter
Top Products
6.3 When the Message “Replace Staple Cartridge.” Appears
6
CF2002/CF3102 6-9
Touch Panel Messages Chapter 6
6.3 When the Message “Replace Staple Cartridge.”
Appears
When finisher FN-116 or FN-8 is installed and is about to run out of staples, the
message shown below appears.
Follow the procedure below to replace the staple cartridge.
Display in Enlarge Display Mode
If the staples are empty, appears in the screen on the touch panel. Touch
to display the message shown in the following illustration.
✎
Note
Be sure to replace the staple cartridge only after the message appears,
otherwise the machine may be damaged.