Filter
Top Products
6
6.4 When the Message “Misfeed detected.” Appears
6-40 CF2002/CF3102
Touch Panel Messages Chapter 6
4
Open the front door of the finisher.
5
Turn misfeed-clearing dial
clockwise until the removal
indicator is completely blue.
❍
If the dial is turned too far, turn
it counterclockwise to adjust it.
✎
Note
If the message “Misfeed
detected”. appears, be sure to
perform these steps. If the
paper is pulled out with too
much force without performing
these steps, the finisher may be damaged.
6
Open the upper door of the
finisher, and then pull out any
paper in the feed section.
7
Close the upper door.