Filter
Top Products
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-55
Utility Mode Operations Chapter 5
8
If the staple position is
too far to the right of the
center of the paper,
touch to specify
the desired negative
adjustment (between
-1 mm and -7 mm).
9
Touch [Folding Position].
10
If the folding position is
shifted to the left, touch
to specify the
desired positive
adjustment (between
+1 mm and +7 mm).
11
If the folding position is
shifted to the right,
touch to specify
the desired negative
adjustment (between
-1 mm and -7 mm).
12
Touch [Enter].
13
Touch [Fin. Time] in the next three screens that appear.
14
Use the “Booklet Creation” setting to make another copy sample.
15
Check the print result.
❍
If more adjustment is necessary, return to step 1 and repeat the adjustment
procedure.