Filter
Top Products
6
6.5 When the Message “Staple mode cannot be used.” Appears
6-44 CF2002/CF3102
Touch Panel Messages Chapter 6
3
Pull the staple holder out toward
you.
4
Push the staple holder guide up,
and then pull out one sheet of
staples.
5
Move the guide back to its original
position.
6
Insert the staple holder until it
locks into place.
7
Slide the finisher back against the copier.
✎
Note
If stapling still cannot be performed, even after performing the above
procedure, contact your technical representative.
Stapler