Filter
Top Products
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-57
Utility Mode Operations Chapter 5
9
Place 10 more sheets of blank paper of the same size on top of the printed test
pattern page.
10
Close the original cover, or the duplexing document feeder if it is installed.
11
Press the [Start] key.
The printed test pattern is scanned.
12
Based on the scanned image, the gradation levels are automatically adjusted.
After the gradation levels are adjusted, the Admin. Mode screen appears again.
13
Repeat steps 5 through 12 three times.
14
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.