Filter
Top Products
5
5.1 Utility Screen
5-4 CF2002/CF3102
Utility Mode Operations Chapter 5
Specifying the Initial Mode Settings (“Reset Mode” Function)
The mode selected when the power switch is turned on (set to “I”) is called the initial
mode.
The settings for the mode selected when the power switch is turned on (set to “I”)
can be specified using the “Reset Mode” function.
To specify the initial mode settings
1
Select the desired Copy mode settings.
❍
For details on selecting Copy mode settings, refer to “Specifying Copy
Settings” in the Basic Operations volume.
2
Press the [Utility] key.
3
Touch [Input].
4
Touch [Reset Mode].
5
Touch [Set-up Mode].
6
Touch [Input].
✎
Note
If [Set-up Mode] is
selected, the
current Copy mode
settings are stored
as the initial mode
settings.
7
Touch [Enter], and then touch [Enter] again in the screen that appears.
8
Touch [Fin. Time].