Filter
Top Products
5
5.5 Administrator Mode Operations
5-54 CF2002/CF3102
Utility Mode Operations Chapter 5
To set the “Center Binding Position” function
This function is used to make fine adjustments to the center stapling position and
the folding position when binding. (The default setting is [0 mm].)
Use the “Booklet Creation” setting to make a copy sample.
For details on booklet-binding, refer to “Original Documents/Feeding the
Document” in the Basic Operations volume.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Expert Mode].
5
Touch [Center Binding
Position].
6
Compare the width of
the left pages of the
copy sample with the
width of the right pages.
7
If the staple position is
too far to the left of the
center of the paper,
touch to specify
the desired positive
adjustment (between
+1 mm and +7 mm).