Filter
Top Products
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-49
Utility Mode Operations Chapter 5
9
Check that the top
margin of the test
pattern is between
4.5 mm and 5.5 mm. If
the top margin is within
the specified range,
skip to step 14.
10
If the top margin is less than 4.5 mm, touch to specify the desired positive
adjustment (between +0.1 mm and +3.0 mm).
11
If the top margin is more than 5.5 mm, touch to specify the desired
negative adjustment (between -0.1 mm and -3.0 mm).
12
Press the [Start] key. The adjusted test pattern is printed on 11 × 17-size paper.
13
Check the print result to make sure that the top margin is adjusted to between
4.5 mm and 5.5 mm.
❍
If more adjustment is necessary, return to step 8 and repeat the adjustment
procedure.
14
Touch [Enter].
15
Touch [Fin. Time] again in the next three screens that appear.
a: 5.0 mm ± 0.5 mm
a