Filter
Top Products
7
7.1 When the Print Quality Is Low
7-4 CF2002/CF3102
Troubleshooting Chapter 7
The edge of the printed output is
dirty.
The document pad is dirty. Clean the document pad with a
soft cloth dampened with a mild
detergent. (See p. 8-9)
The selected paper size is
larger than the document (with
Zoom set to “
×
1.000”).
Select a paper size that is the
same size as the document.
(See section 2.2 in the Basic
Operations volume.)
Otherwise, set Zoom to “Auto
Size” to enlarge the copy to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
The orientation of the document
is different from the orientation
of the paper (with Zoom set to
“
×
1.000”).
Select a paper size that is the
same size as the document.
Otherwise, select a paper
orientation that is the same as
that of the document.
The copy was reduced to a size
smaller than the paper (a
CustomZoom setting was
selected).
Select a zoom ratio that adjusts
the document size to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
Otherwise, set Zoom to “Auto
Size” to reduce the copy to the
selected paper size.
(See section 5.3 in the Basic
Operations volume.)
Symptom Possible Cause Remedy