Filter
Top Products
5
5.2 Specifying Default Settings (“User’s Choice” Functions)
5-18 CF2002/CF3102
Utility Mode Operations Chapter 5
To set the “Sleep” function
This function is used to specify the length of time after the last operation until the
copier automatically enters Sleep mode. The copier only enters Sleep mode if the
“Disable Sleep Mode”
function of the Administrator mode is set to “No”. (The default
setting is “30 min”.)
For details on the Sleep mode, refer to “Original Documents/Feeding the
Document” in the Basic Operations volume.
1
Press the [Utility] key.
2
Touch [User’s Choice: 1].
3
Touch [2/2].
4
Touch [Sleep].
5
Press the [C] (clear) key.
The current setting is erased.
6
Using the keypad, enter
the desired length of
time (between 15 and
240 minutes).
❍
If you do not want
the copier to enter
Sleep mode, touch
[No].
7
Touch [Enter].
8
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.