A SERVICE OF

logo

Open as PDF
next previous
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-43
Utility Mode Operations Chapter 5
8
Fold the paper in half while aligning
the corners of the printed test pattern.
9
If horizontal lines A and B are angled
as shown at the right, touch to
specify the desired negative
adjustment for θ (between -1 dot and
-10 dots).
10
If horizontal lines A and B are angled
as shown at the right, touch to
specify the desired positive
adjustment for θ (between +1 dot and
+10 dots).
11
Press the [Start] key.
The adjusted test pattern is printed on 11 × 17-size paper.
B
A
A
B
A
B