Filter
Top Products
5.2 Specifying Default Settings (“User’s Choice” Functions)
5
CF2002/CF3102 5-29
Utility Mode Operations Chapter 5
To set the “Auto-select Paper for Small Original” function
This function is used to select whether or not to print documents with a size that is
too small and cannot be automatically detected. (The default settings are “ON” and
the 1st drawer.)
If this function is set to “Off”, copies cannot be made under either of the following
conditions.
✔
When the [Start] key is pressed with the Paper setting “Auto Paper” selected,
but the size of the document is too small to be detected and the paper cannot
be selected
✔
When the [Start] key is pressed with the Paper setting “Auto Paper” selected,
but no document has been loaded
✎
Tip
If this function is set to “ON”, copies will be made even under the conditions
described above.
In this case, since the document size cannot be detected and the paper cannot
be automatically selected, the paper (source) must be selected.
1
Press the [Utility] key.
2
Touch [User’s Choice: 2].
3
Touch [2/2].
4
Touch [Auto-select
Paper for Small
Original].