Filter
Top Products
7
7.1 When the Print Quality Is Low
7-2 CF2002/CF3102
Troubleshooting Chapter 7
7.1 When the Print Quality Is Low
Symptom Possible Cause Remedy
The printed output is too light. The copy density is set too light. Select a darker setting for the
“Density” parameter.
(See section 1.2 in the Basic
Operations volume.)
The paper is damp. Replace the paper.
(See section 3.5 in the Basic
Operations volume.)
The printed output is too dark. The copy density is set too
dark.
Select a lighter setting for the
“Density” parameter.
(See section 1.2 in the Basic
Operations volume.)
The document is not pressed
tight enough against the original
glass.
Position the document so that it
is pressed tightly against the
original glass.
(See section 4.2 in the Basic
Operations volume.)
The printed output is blurry. The paper is damp. Replace the paper.
(See section 3.5 in the Basic
Operations volume.)
The document is not pressed
tight enough against the original
glass.
Position the document so that it
is pressed tightly against the
original glass.
(See section 4.2 in the Basic
Operations volume.)