Filter
Top Products
Contents
iv CF2002/CF3102
6 Touch Panel Messages
6.1 When the Message “CF Toner Cartridge (X) needs to be
replaced soon.” Appears............................................................. 6-2
Display in Enlarge Display Mode.................................................... 6-2
6.2 When the Message “Replace the CF Toner cartridge”
Appears......................................................................................... 6-3
Display in Enlarge Display Mode.................................................... 6-3
To replace the toner cartridge ........................................................ 6-5
6.3 When the Message “Replace Staple Cartridge.” Appears........ 6-9
Display in Enlarge Display Mode.................................................... 6-9
To replace the staple cartridge for FN-116................................... 6-10
To replace the staple cartridge for FN-8....................................... 6-12
6.4 When the Message “Misfeed detected.” Appears...................6-17
Locations of Paper Misfeeds........................................................ 6-17
Locations of Paper Misfeeds in the Enlarge Display Mode ..........6-17
To clear a paper misfeed in the manual bypass tray.................... 6-19
To clear a paper misfeed in the duplex unit.................................. 6-21
To clear a paper misfeed in a paper drawer................................. 6-22
To clear a paper misfeed in the large capacity cabinet ................6-24
To clear a paper misfeed in the right-side door............................ 6-25
To clear a paper misfeed in the upper right-side door.................. 6-28
To clear a paper misfeed in the duplexing document feeder........ 6-31
To clear a paper misfeed in finisher FN-116 ................................6-35
To clear a paper misfeed in finisher FN-8 .................................... 6-39
6.5 When the Message “Staple mode cannot be used.”
Appears....................................................................................... 6-43
To clear jammed staples in FN-116.............................................. 6-43
To clear jammed staples in FN-8.................................................. 6-45
6.6 When the Message “Remove Punch scraps.” Appears..........6-51
Display in Enlarge Display Mode.................................................. 6-51
To empty the hole-punch waste container.................................... 6-52
6.7 When the Inspection Mark “” Appears............................... 6-53
Display in Enlarge Display Mode.................................................. 6-53
Display in Enlarge Display Mode.................................................. 6-54
6.8 When the Message “Malfunction detected.” Appears ............ 6-55
Display in Enlarge Display Mode.................................................. 6-55
6.9 When the Message “XXXX needs to be replaced soon.”
Appears....................................................................................... 6-56
Display in Enlarge Display Mode.................................................. 6-56