Filter
Top Products
5
5.2 Specifying Default Settings (“User’s Choice” Functions)
5-20 CF2002/CF3102
Utility Mode Operations Chapter 5
To set the “Enlarge-Display Notice” function
If the “Auto Clear Mode” function is set to “Yes”, the message requesting
confirmation to cancel the Enlarge Display mode can be displayed. (The default
setting is “No”.)
In addition, it is possible to specify the length of time that the message requesting
confirmation to cancel the Enlarge Display mode is displayed.
For more details, refer to “Confirming the Cancellation of the Enlarge Display Mode”
in “Before Making Copies” of the Enlarge Display Operations Guide.
1
Press the [Utility] key.
2
Touch [User’s Choice:
1].
3
Touch [2/2].
4
Touch [Enlarge-Display
Notice].
5
Select the desired
setting and specify the
length of time (30, 60,
90 or 120 seconds) that
the message
requesting confirmation
to cancel the Enlarge
Display mode is
displayed.
6
If you do not wish for the message requesting confirmation to cancel the Enlarge
Display mode to appear, touch [No].
7
Touch [Enter].
8
Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears.