4.1 Components and Their Functions
4
CF2002/CF3102 4-3
Part Names and Their Functions Chapter 4
No. Part Name Description
8 Original Cover OC-2
(optional)
Presses down on the loaded document to keep it in place
Referred to as the
original cover
throughout the manual
9 Duplex Unit AD-14 (optional) Turns over copies, allowing double-sided copies to be made
automatically.
• If a printer controller (CN3102Pro or CN3102e) and the
duplex unit are installed on the CF3102, the memory must be
expanded. If the optional memory is not installed, automatic
double-sided copying cannot be performed.
Referred to as the duplex unit throughout the manual
10 Paper Feed Unit
PF-118 (optional)
Equipped with a paper drawer that can supply 500 sheets of
paper; up to two paper feed units can be installed.
Referred to as the
paper feed unit
throughout the manual
11 Copy Table CT-2 (optional) A paper feed unit can be set up on the copy table, and then the
printer can be set up on the top.
By setting up the printer on the copy table, the printer can be
placed on the floor instead of on a desk, keeping the entire
surface of the desk free.
Referred to as the
copy table
throughout the manual
12 Finisher FN-8 (optional) Finishes copies according to the selected finishing mode
(sorting, stapling, hole-punching or binding), then feeds out the
pages
• The hole-punching function is only available if the optional
punch kit (PK-4) is installed onto finisher FN-8. If the finisher
is installed, the printer must be installed on the copy desk, on
the large capacity cabinet or over a paper feed unit combined
with the copy table.
13 Copier Stand CS-2 (optional) Reduces the installation area required for the equipment if the
scanner is installed on the top of the stand and the printer is
installed on the inside
Referred to as the
copier stand
throughout the manual
8
12
9
10
11
13
