Filter
Top Products
5
5.5 Administrator Mode Operations
5-50 CF2002/CF3102
Utility Mode Operations Chapter 5
To set the “PRT Area (Left Margin)” function
The left margin of the printing area can be adjusted for each paper drawer.
The procedure with 11 × 17-size paper loaded into the 1st drawer is described
below.
✎
Note
The top margin of the print area is adjusted during manufacturing of the copier.
Normally, the top margin will not need to be adjusted.
1
Load 11 × 17-size paper into the 1st drawer.
2
Press the [Utility] key.
3
Touch [Admin. Mode].
4
Using the keypad, enter the administrator access code.
5
Touch [Expert Mode].
6
Touch [PRT Area (Left
Margin)].
7
Touch [1st Drawer].
8
Press the [Start] key.
The test pattern is
printed on the 11 × 17-
size paper.