Filter
Top Products
5
5.5 Administrator Mode Operations
5-36 CF2002/CF3102
Utility Mode Operations Chapter 5
To set the “Top Erase” function
This function is used to set the amount of loss at the edge of the original. This
amount is erased during printing. (The default setting is [5 mm].)
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, enter the administrator access code.
4
Touch [Admin. set].
5
Touch [Top Erase].
6
Select the desired
setting.
7
Touch [Enter].
8
Touch [Fin. Time] again in the next three screens that appear.