Filter
Top Products
5.2 Specifying Default Settings (“User’s Choice” Functions)
5
CF2002/CF3102 5-19
Utility Mode Operations Chapter 5
To set the “Auto Clear Mode” function
This function is used to specify whether or not the copier clears all settings when it
detects that the user of the copier has changed, for example, when the magnetic
card has been removed from the optional data controller or when the key counter
has been removed. (The default setting is [Yes].)
For details on clearing all settings when a new user is detected, refer to “Original
Documents/Feeding the Document” in the Basic Operations volume.
1
Press the [Utility] key.
2
Touch [User’s Choice: 1].
3
Touch [2/2].
4
Touch [Auto Clear
Mode].
5
Select the desired
setting.
6
Touch [Enter].
7
Touch [Fin. Time], and
then touch [Fin. Time]
again in the screen that
appears.