Filter
Top Products
5.2 Specifying Default Settings (“User’s Choice” Functions)
5
CF2002/CF3102 5-7
Utility Mode Operations Chapter 5
5.2 Specifying Default Settings (“User’s Choice”
Functions)
With the User’s Choice function, the initial mode settings can be customized
according to how the copier is to be used.
User’s Choice: 1 Screens
(Refer to p. 5-10)
●
This function is used to specify whether or not a confirmation beep is sounded
each time a key in the operation panel is pressed.
(Refer to p. 5-11)
●
This function is used to set the current date and time.
(Refer to p. 5-13)
●
This function is used to set the memory recall feature, which allows settings
from past copy jobs to be recalled.
(Refer to p. 5-15)
●
This function is used to specify the length of time until the repeat feature for a
key starts and the length of the time that a key must be held down between
subsequent repeats.
(Refer to p. 5-16)
●
This function is used to specify the length of time after the last operation until all
functions return to their default settings.
(Refer to p. 5-17)
●
This function is used to specify the length of time after the last operation until
the copier automatically enters Energy Saver mode.
(Refer to p. 5-18)
●
This function is used to specify the length of time after the last operation until
the copier automatically enters Sleep mode.