Filter
Top Products
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-51
Utility Mode Operations Chapter 5
9
Check that the left
margin of the test
pattern is between
2.5 mm and 3.5 mm. If
the left margin is within
the specified range,
skip to step 14.
10
If the left margin is less than 2.5 mm, touch to specify the desired positive
adjustment (between +0.1 mm and +3.0 mm).
11
If the left margin is more than 3.5 mm, touch to specify the desired
negative adjustment (between -0.1 mm and -3.0 mm).
12
Press the [Start] key. The adjusted test pattern is printed on 11 × 17-size paper.
13
Check the print result to make sure that the left margin is adjusted to between
2.5 mm and 3.5 mm.
❍
If more adjustment is necessary, return to step 8 and repeat the adjustment
procedure.
14
Touch [Enter].
15
Touch [Fin. Time] again in the next three screens that appear.
b: 3.0 mm ± 0.5 mm
b