8
8.3 Function Combination Table
8-18 CF2002/CF3102
Appendix Chapter 8
Text Enhancement setting has no effect on, such as “Photo Image”.
Next, select a Photo/Density setting where the Text Enhancement setting can
be specified, such as the “Text” setting (32) or the “Map” setting (34). The
previously specified Text Enhancement setting of “+3 (Darker)” is maintained.
:The “Centering” function from the Utility mode can be set, but will not be applied.
Number of
First Setting
Number of
Next Setting
Description
1 57, 58 Number of copies:
If the entered number of copies exceeds the number allowable for the
“Non-sort” and “stapling” settings, a message warning that the number
of copies for stapling has been exceeded. If the warning is ignored and
the job is started, the “stapling” setting is canceled.
57, 58 1
4 77 ~ 82, 85 Color setting “Auto Color”
The functions cannot be combined with the Color setting “Auto Color”.
However, if the Color setting “Auto Color” determines that the Color
setting “Black” should be used, printing continues without the setting for
the Color image Adujst parameters applied.
77 ~ 82, 85 4
40 12 ~19 1st drawer (multipurpose paper drawer):
The functions cannot be combined if a paper size that cannot be loaded
into the 1st drawer is selected.
A message appears, warning that the 1st drawer is selected and the
paper type was changed.
48, 50, 52,
53, 54
11~19
23, 27 67 “Multi-Page Enlargement” function:
The zoom ratio specified for the “Multi-Page Enlargement” function is
applied.
67 23, 27 “Multi-Page Enlargement” function: A zoom ratio cannot be specified.
74 63, 68 “Mixed Orig Detection” function:
The function can be selected, but the setting is not applied.
63, 68 74
57, 58 76 Interrupt mode:
With the stapling on finisher FN-8, printing is interrupted between copy
sets.
67 76 Interrupt mode: The job cannot be interrupted while scanning for the
“Multi-Page Enlargement” function.
63, 66, 67, 68 89 “Centering” function:
The function can be selected, but the setting is not applied.
89 63, 66, 67, 68
90 11~19 “Job Memory Input” function: A program using the 1st drawer cannot be
stored.
All All Test prints:
Another function cannot be selected while a test print is being printed.
When a test print is printed, the mode returns to the one before the test
print was performed. The paper drawer is selected according to the
priority order.