Filter
Top Products
5.5 Administrator Mode Operations
5
CF2002/CF3102 5-53
Utility Mode Operations Chapter 5
9
Check that the left
margin of the test
pattern for the second
side is between 2.5 mm
and 3.5 mm.
If the left margin for the
second side is within
the specified range,
skip to step 14.
10
If the left margin for the second side is less than 2.5 mm, touch to specify
the desired positive adjustment (between +0.1 mm and +3.0 mm).
11
If the left margin for the second side is more than 3.5 mm, touch to specify
the desired negative adjustment (between -0.1 mm and -3.0 mm).
12
Press the [Start] key.
The adjusted test pattern is printed on 11 × 17-size paper.
13
Check the print result to make sure that the left margin for the second side is
adjusted to between 2.5 mm and 3.5 mm.
❍
If more adjustment is necessary, return to step 8 and repeat the adjustment
procedure.
14
Touch [Enter].
15
Touch [Fin. Time] again in the next three screens that appear.
c: 3.0 mm ± 0.5 mm
c