A SERVICE OF

logo

6
6.11 Other Messages
6-58 CF2002/CF3102
Touch Panel Messages Chapter 6
6.11 Other Messages
Message Cause Remedy
Original left on the Glass. The document was left on the
original glass.
Remove the document from the
original glass.
Matching paper size is not
available.
Reselect the paper size.
Paper of a suitable size is not
loaded in a paper drawer.
Either select a different copy size
or manually feed paper of a
suitable size.
Originals size cannot be
detected.
Reselect the paper size.
(1) The document is not
positioned correctly.
(2) A document with an
unspecified size or with a size too
small to be detected is loaded.
(1) Position the document
correctly.
(2) Select the correct paper size.
This mode cannot be selected
with the XXXXXX.
Functions that cannot be used
together are selected.
Make copies using only one of
the functions.
The Exit Tray has reached its
capacity.
Since the maximum amount of
copies for the indicated finisher
output tray has been exceeded,
the copier is unable to make
copies.
Remove all copies from the
indicated tray.
Please input your 4-digit
Access# and press the Access
key.
Access codes have been
specified. Copies cannot be
made unless a specified access
code is entered.
Enter your access code.
(See section 2.6 of the Basic
Operations volume.)
Your account has reached its
maximum allowance.
The limit on the number of copies
that can be made has been
reached.
Contact your technical
representative.
Section -> is open.
Close it properly.
Since a copier door or cover is
open or an option is not installed
correctly, the copier is unable to
make copies.
Make sure that all doors and
covers are closed and that all
options are installed correctly.
Please insert the Fusing Unit
and close all doors.
The fusing unit is not installed
correctly.
Reinstall the supplies or parts, or
contact your technical
representative.
Install the CF toner cartridge,
and then move the lever to the
correct position.
The indicated toner cartridge is
not installed correctly.
Please insert the Waste Toner
Bottle and close all doors.
The waste-toner bottle is not
installed correctly.
Please insert the Image
Transfer Belt Unit and close all
doors.
The image transfer belt unit is not
installed correctly.
Replenish paper. The indicated drawer has ran out
of paper.
Load paper into the indicated
drawer.
(See section 3.5 of the Basic
Operations volume.)
CF Toner cartridge (X) needs to
be replaced soon.
The toner for the indicated color
is about to run out.
Replace the toner cartridge
according to your maintenance
agreement.
Toner X is empty. Since the toner for the indicated
color has run out, the copier is
unable to make copies.