3300 ICP Hardware User Guide
126 Release 3.3
8. Press the Reset button on the 3300 Controller.
9. Remove the Serial connection. The system will return to service in about 10 to 15 minutes.
Install the 3300 Configuration Tool
Hardware Requirements
The minimum PC requirements for installing the 3300 Configuration Tool are:
• CPU: Pentium II @ 333MHz
• Memory: 256 MB RAM
• Ethernet Card
• Ethernet Cable
• Serial Port
• Serial Cable
• Operating System: Microsoft Windows NT 4.0 or Windows Professional
Install the 3300 Configuration Tool
The 3300 Configuration Tool PC must have Windows NT 4.0 or Windows 2000 Professional
operating system. In addition, the Java Plug-in 1.1.3 by Sun™ Microsystems is required (the
Java Plug-in is shipped with the 3300 Configuration Tool software).
• Ensure that Internet Information Server 5 is installed.
• Clear your Internet Explorer cache.
To install the 3300 Configuration Tool:
1. Insert the 3300 Configuration Tool CD-ROM into the CD-ROM drive.
2. Open Explorer and double-click the QUICKSetup_Quick*****.exe file in the root directory
of the CD-ROM drive.
3. Click Yes to the prompt "This will install Mitel Networks Configuration Tool ’version number’.
Do you Wish to Continue?"
4. Click OK to the message related to your operating system.
5. Click Next at the Welcome page.
6. Click Yes to accept the license agreement.
7. Click Next to select the default destination folder, or click Browse to install in a different
folder.
8. Click Next to begin copying files to the target directory.
Note: It may be helpful to leave the serial connection in place to capture any potential
errors.
Note: The 3300 Configuration Tool and OPS Manager cannot be installed on the same
server.