Mitel 3300 Network Hardware User Manual


 
3300 ICP Hardware User Guide
28 Release 3.3
New Zealand
Tone Output Levels
iONS ONS iOPS OPS iACO iACOs ACO ACOs DCO ATT
ARS 2nd Dial -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Busy -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Dial -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Camp-on -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Conference -18 -18 -15 --- -13 -16 -13 -13 -11 -15
Confirmation -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Feature Active Dial -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Interrupted Dial -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Message Notification -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Modem Answer -24 -24 -21 --- -19 -22 -19 -19 -17 -21
Override -22 -22 -19 --- -17 -20 -17 -17 -15 -19
Paging -23 -23 -20 --- -18 -21 -18 -18 -16 -20
Reorder -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Ringback -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Special Busy -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Special Ringback -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Transfer Dial -16 -16 -13 --- -11 -14 -11 -11 -9 -13
Voice Mail -23 -23 -20 --- -18 -21 -18 -18 -16 -20
Note: DTMF tones are supported.
Note: Digital (DGS) and IP (WAN) tones are conveyed as Real-Time Transfer Protocol (RTP) packets.
Note: "---" indicates that this interface is not supported in this country.
Tone Plan
Tone
Frequency
(Hz)
Cadence (s)
ARS 2nd Dial 400 Continuous
Busy 400 0.5 on, 0.5 off, repeat
Camp-on 520 0.2 on, off
Conference 400 0.6 on, off
Confirmation 1400 Continuous
Dial Tone 400 Continuous
Feature Active Dial 400 0.75 on, 0.75 off, then continuous
Interrupted Dial 400 0.75 on, 0.75 off, then continuous
Message Notification 400, 520,
400
400 (0.75 on, 0.75 off) x 2, then 520 (0.2 on, 0.75 off) x 1, then 400 (0.75
on, 0.75 off, repeat forever)
Modem Answer 2025 0.95 on, 0.05 off, repeat
Override 1400 0.3 on, off
Paging 440 0.2 on, off
Reorder 400 0.075 on, 0.1 off, 0.075 on, 0.75 off, repeat
Page 1 of 2