Filter
Top Products
Install Upgrades and FRUs
Release 3.3 207
7. Manually Reboot the 3300 ICP. Check the logs for any data restore failures (see Note
below).
8. Collect the telephone directory information from the 3300 ICP using the Telephone Direc-
tory Full Collect application in the Configuration Tool.
9. Collect unused circuit information from the 3300 ICP using the Collect Unused Directory
Circuits application in the Configuration Tool.
10. Import the .csv file that contains the Name, Number and PIN information of each Symbol
phone user using the Moves, Adds and Changes application in the Configuration Tool.
11. Change the 3300 ICP system name and the default usernames/passwords using the
System Administration Tool.
12. Update the firmware in the Symbol NetVision phone. Refer to the Symbol NVP II MiNET
Update Procedure located in the Hardware User Guide.
13. Complete the programming of the Symbol phone using the Symbol NetVision MiNET
Phone Administrator Tool.
Note: After the Restore and Reboot, check the log file. In the System Administration Tool,
click Maintenance and Diagnostics, select Maintenance Commands, and click All.
Type the following text in the Command line: type *.dr.logfile_1 and click Submit.