Mitel 3300 Network Hardware User Manual


 
Install Upgrades and FRUs
Release 3.3 205
Export the Name, Number and PIN of each user with a Symbol phone to a .csv file using
the Telephone Directory Export Application in OPS Manager (only do this if you are
migrating a 3200 ICP that has Symbol Phones programmed that use Direct Sequence
Spread Spectrum).
Install the Symbol NetVision MiNET Phone Administrator Tool on a Windows NT or
Windows 2000 PC.
To transfer database from a 3200 ICP to a 3300 ICP:
1. Prepare the 3200 ICP for migration:
- deprogram unsupported devices and cards (AC15, SCDC, ISDN Gateway, COV Line
Card, 3DN, 4DN, SUPERSET 3, SUPERSET 4, SUPERSET 7DN, and datasets)
- Change OPS Manager Settings
2. Program 3200 ICP connectivity using the Configuration Tool. Create a Network Element
that is the same as the 3200 ICP.
3. Back up 3200 ICP database (datasave) to the 3300 Configuration Tool or copy a datasave
from OPS Manager to the Configuration Tool.
4. Prepare the 3300 ICP for migration:
- Enable Options and manually reboot the system
- Change the System name in the System Options Assignment to match that of the
system being migrated
- Set the IP Address, Host Name, FTP Username, and FTP password to match the
Configuration Tool PC in the Controller Registry Configuration form.
5. In the Configuration Tool Network Element Editor, change the Variant to 3300 ICP and
change the IP Address if required.
6. Perform a Restore of the 3200 ICP converted database onto the 3300 ICP. An automatic
validation operation occurs to determine if the restore can proceed.
7. Reboot the 3300 ICP. Check the logs for any data restore failures (see Note below).
8. (Optional - see Note 2) Collect the telephone directory information from the 3300 ICP using
the Full Collect application in the Configuration Tool.
9. (Optional - see Note 2) Collect information on the free PLIDs using the Free PLID Collection
application.
10. (Optional - see Note 2) Import the .csv file that contains the Name, Number and PIN
information of each Symbol phone user using the Moves, Adds and Changes Import
application in the Configuration Tool.
11. Change the 3300 ICP system name through the System Administration Tool.
12. Deprogram the 3200 ICP FD_DSU using the System Administration Tool.
13. Install new hardware (Network Services Unit or DSU Cabinet).
14. Reprogram the digital links.
Note: Although the 3200 ICP FD_DSU programming is restored to the 3300 ICP, you
must deprogram the DSU and reprogram using the System Administration Tool after you
install new hardware.