Filter
Top Products
Install Upgrades and FRUs
Release 3.3 201
34. Log in to the 3300 ICP ESM using the default username (system) and password
(password). You see the 3300 ICP ESM main tools menu.
35. Set the options in the License and Option Selection form according to your purchased
Mitel options.
To set the options:
- At the main tools menu, click System Administration Tool.
- Click in the Selection: drop-down menu, where it says [Click here to start].
- Click System Configuration, click System Capacity, and then click License and
Option Selection. You see the License and Option Selection view.
- Click Change in the top right corner. You see a pop-up window.
- Click OK to proceed to change your options. (Clicking Cancel will return you to the
License and Option Selection view.)
- Enter the purchased system options. Note that you can change the Country, Net-
working Option, Mitai/Tapi Computer Integration, and Extended Agent Group
fields without a new Mitel Options Password.
- Enter your Mitel Options Password, and click Save.
Restoring the database
36. A pop-up window instructs you, "If you have a database to restore, do that now. If there
is no database to restore, reboot now." Click OK. (You will be restoring a database).
37. In the Selection: drop-down menu, click Maintenance and Diagnostics and then click
Restore.
38. Type the location of the database that is being restored, or use the browse facility.
39. Click Start Restore. A window warns you that you must manually reboot after a restore
and that a restore replaces the current database.
40. Click OK. The system will show an "in progress" message and then a "complete" message.
41. Click OK.
42. Click the Exit button until you are logged out of ESM.
43. Manually reset the system by pressing the Reset button on the 3300 Controller.
Tip: If your login fails, it may be because the system is not finished loading. Once you
see "Voice Mail successfully started" in the RTC, you should be able to log in.
Note: Since the installation of new software erases all of your system settings, you must
complete this form even if you have not purchased any new options.
Timer: The system can take up to 3 minutes to save your changes.
Note: The system does not allow you to log in during the restore and reset period. Once
the system has completed the restore and reset, you should see
"deleting/ipservicesdb.tar" in the RTC. This is a good indication that you can log back in
to the 3300 ESM.