Mitel 3300 Network Hardware User Manual


 
3300 ICP Hardware User Guide
186 Release 3.3
The new Release 3.2 chassis:
1. Remove the cover.
2. Install the two DSP Modules (Slot 3 and Slot 4).
3. Install the Sys Id Module that you removed from the 3.0/3.1 chassis.
4. Install the Hard Drive that you removed from the 3.0/3.1 chassis.
5. Replace the cover.
250 User to 700 User System - No Compression Channels
250 user system (Release 3.0/3.1 chassis) upgrade to 700 user system.
This system uses the following existing modules:
One RTC (3.0/3.1 133 MHz; 3.2/3.3 300 MHz)
One E2T (3.0/3.1 133 MHz; 3.2/3.3 300 MHz)
One Dual FIM Module
One DSP Module (21061/21161) for telecom support
One 64 Channel Echo Canceller
Add the following modules:
Note: Some controllers in release 3.0 had the DSP installed in Slot 6. This DSP should
be moved to Slot 8 before installing the compression DSP in Slot 3.