Filter
Top Products
385
APPENDICES
A
Appendix 3 When Using GX Developer and GX Configurator-TC
Appendix 3.2 GX Configurator-TC operation
Monitor/test
• Y04: CH1 auto tuning start command • CH manipulated value (0-4000/0-12000/0-16000)
• Y05: CH2 auto tuning start command • manipulated value resolution Change switching
• Y06: CH3 auto tuning start command • CH temperature rise judgment flag
• Y07: CH4 auto tuning start command
• Temperature rise completion range setting (Unit:
deg.)
• Y08: E
2
PROM backup start command
• Temperature rise completion soak time setting
(Unit: min)
• Y09: Default setting registration start command • CH input range
• Y0B: Setting change command • CH upper setting limiter
• Y0C: CH1 forced PID control stop command • CH lower setting limiter
• Y0D: CH2 forced PID control stop command • CH forward/reverse action setting
• Y0E: CH3 forced PID control stop command • CH setting change rate limiter (× 0.1%/min)
• Y0F: CH4 forced PID control stop command • CH sensor compensation value setting (× 0.01%)
•CH proportional band (P) setting (× 0.1%)
•CH primary delay digital filter setting
(Unit: s)
•CH integral time (I) setting (Unit: s) • CH upper output limiter (× 0.1%)
•CH derivative time (D) setting (Unit: s) • CH lower output limiter (× 0.1%)
•CH PID constants read command from EEPROM • CH output variation limiter (× 0.1%)
•CH EEPROM PID constant read completion flag
•CH adjustment sensitivity (dead band) setting (×
0.1%)
•CH EEPROM PID constant read abnormal
completion flag
•CH AT bias
•CH control output period setting (Unit: s) • CH unused channel setting
•CH control response parameter
• Transistor output monitor ON delay time setting (×
10ms)
•CH stop mode setting • CH MAN mode shift completion flag
• PID continuation flag • CH AUTO/MAN mode switching
•CH alert definition Temperature process value
(PV) upper limit cross alert
•CH MAN output setting (× 0.1%)
•CH Temperature process value (PV) lower limit
cross alert
• Auto tuning
•CH Alert 1
Function Description